There is more to preparing your land for construction than showing up and hopping in the truck. Your lot may be full of unwanted trees, brush, stumps and other impediments for your contractors and equipment. Land clearing tree removal prepares the site for the big build while setting the stage for what needs to be accomplished. You want to make careful preparations so land clearing tree removal doesn't create problems for your contractor. Take these steps when planning land clearing tree removal and preparing your land for construction.
Start With a Property Inspection
Walk your lot and note trees that will hinder the construction process. Mark locations that you may have to clear for the construction of the home, driveway, utilities, drainage or access in and out of the lot.
Note trees that may need special attention due to height or placement. Inspection allows for a determination of work area and equipment needs as well as possible obstructions. If the condition of the trees is not as expected, then don't hesitate to contact a tree professional for an inspection before any tree removal begins.
Determine the Areas That Need Clearing
With the plans for the home in hand, mark the areas to be cleared for tree removal, brush and stumps. Having the plans available is important. They tell you where you need to be cleared and what is the safe working zone for the tree crew.
By marking your boundaries, the removal team knows what stays and what goes. Don't forget to mark the area for equipment access, storage, deliveries and anything else that you may want included for temporary use.
Plan Tree and Stump Removal
Stumps and large roots are left in the ground after tree removal. Depending on the location, they too may have to be removed as part of the construction process. It is up to you to inform the tree professional whether you want the stump to be ground down or removed entirely. It depends on the location of the stump and how your construction project will require it to be. This problem can be avoided before the construction stage.
Mark Property Hazards and Utilities
Before any digging can begin, locate and mark all utilities and other hazards. Marking the utilities means no one will dig into a gas line by accident. Utilities such as power, cable lines, water, and underground sewage lines can be avoided by having them exposed and clearly marked.
Take special care in marking any overhead power lines or other structures that could be hazardous to workers, tree climbers or your equipment during the process. An electric line lying on the ground must never be handled by any person. Always inform the concerned utility of the situation. If a tree removal is done incorrectly, it could result in injury to workers, damage to the home and injury to your workers.
Prepare for Tree Debris
The removal of trees produces a lot of waste material. Branches, logs, leaves, wood chips, and much more. There are options for dealing with the debris. Branches and logs can be cut up for firewood if you have a good wood splitter. Larger material can be chipped or ground up depending on what equipment is available. Ask your tree service what options are available for cleanup and debris removal.
Be Ready for Emergency Tree Removal
Preparations can only go so far. Wind, ice, lightning and storms can decide when tree removal will occur. Tree limbs and branches can accumulate on top of other trees causing a snow load or breaking the limbs of healthy trees. 24 hour emergency tree removal services can help when nature decides the timing. Always keep the contact information of a professional tree service in case of an emergency.
Communicate With Your Builder
Communication between the land owner and builder is just as important as the coordination between the tree service and builder. Let the tree professionals see the plans and help them understand what you expect of the removal process. You need to let your builder know what dates are acceptable for land clearing tree removal and if there are special conditions that need to be addressed by the tree service first. It builds a solid relationship between all involved.
Prepare Your Property for Construction
After trees, stumps and other nuisances have been dealt with, walk through your lot to note the access and working areas. The trees that remain should have been noted as well. Land clearing tree removal is much more about working in conjunction with the construction project than it is an end-all proposition. By inspecting, marking areas, noting utilities, preparing for debris and communicating with your builder, the tree removal professionals can set up your property for success in the next phase of your project.
If unexpected weather causes a tree emergency during the preparation process, 24 hour emergency tree removal can address urgent situations when immediate tree service is needed.