Is it possible to get a great 3D printer model when you are on a tight budget? If you are shopping at Snapmaker, you can get yourself the best dual extruder 3D printer under $500.
Technically, a low-budget dual extruder printer does not have plenty of features and upgrades, but it will get the job done. Dual extrusion modules are more convenient and user-friendly compared to single extrusion 3D printing modules.
Single extruders are considerably cheaper, but they also have limited features and are more tedious to work with.
With a dual extruder, it is possible to print with different filament colors and types at the same time. With a dual extruder printer, you can create objects that are colorful and more complicated with minimal effort.
The Snapmaker 2.0 model is the best dual extruder 3D printer under $500, and it has the ability to print easily detachable and soluble (breakaway) supports. Removing support material after printing is often a tedious and time-consuming task, and if not done properly, products can be ruined by marks, divots, pits, and blemishes on the surface finish.
Breakaway support material is designed to have low inter-layer adhesion and is formulated to be mechanically brittle, so it will break away cleanly with little force. Soluble materials, such as PVA, can dissolve in water and other solvents. To take advantage of this property, it can be used as a support material to fill out difficult-to-reach geometries that allow liquid to flow into. After the printing process is complete, you can soak the object in water to dissolve away the supports, leaving behind a smooth printed surface.
As the best dual extruder 3D printer under $500, the Snapmaker 2.0 comes with improved slicing software. Upgraded slicing software has better algorithms that are better at planning optimal tool paths for dual extruders to minimize retracts and travel moves. They are also great at assigning different model parts to be printed by each nozzle to maximize usage. Thanks to software advancements, a dual extrusion 3d printer is more user-friendly and reliable, allowing for wider adoption.
However, dual extruder printers have some flaws, including cross-contamination and collision and higher maintenance demands. In dual-color printing, the idle extruder can ooze material due to residual heat and cause contamination when it glides over the printed part or even bumps into it if the nozzle is too low. A dual extruder means twice the hot ends. This equals twice as many parts to check, clean, and replace when there are jams or clogs.
Visit here: https://www.youtube.com/watch?v=9XJ5m6flx_E&t=58s