The last thing you want on a cold day is for your boiler to give up and your central heating to fail. Fortunately, you can help to prevent this from occurring by conducting an annual boiler service. While searching for boiler service near me you should consider the checklist to understand exactly what happens during your engineer appointment.
A boiler service can help ensure your boiler and central heating system are running as smoothly and efficiently as possible. The service usually takes less than an hour, though this will depend on the appliance. During the service, a professional engineer will follow a comprehensive boiler service checklist to make sure everything has been checked and is working well. Booking an appointment can provide peace of mind that your boiler is as safe and efficient as it can be.
Qualified engineers have the expertise needed to provide you with a thorough boiler service. Conducting various tests, the engineers aim to ensure that your boiler is functioning effectively and efficiently.
A typical boiler service checklist will include:
- Visual inspection
The engineer will visually inspect the boiler, clean and adjust components as necessary, look for any signs of damage, and identify any immediately visible signs of distress.
- Operation and control
Your boiler has several controls and safety devices that will be tested for correct operation. An engineer will check that all of the boiler functions are working correctly, should they be required.
- Flue and combustion releases
The engineer will check the construction, termination, and route of the flue (pipe from your boiler to the outside of your house). They will make sure there are no obstructions in the flue terminals and that the flue is safely fitted.
- Clean the main boiler components
During a boiler service, the engineer will remove, inspect and clean the main components in the boiler to ensure they are fit for purpose and have no noticeable defects. This will include the main burner, heat exchanger, flue ways, and ignition pins.
- Conduct a record
The engineer will undertake a series of tests and checks, making a record of each – this will include a record of the boiler pressure or heat input. As the homeowner, you’ll then be able to keep this information for future inspections or when problems arise.
- Ensure the boiler is ready for use
At the end of a boiler service, the engineer will make sure the boiler is working well. Any controls or settings that were altered during the service will be either put back to the customer’s settings or left so that the customer can easily adjust the settings themselves.
Registered engineers are always happy to offer advice and explain how they conduct a boiler service. While the six steps above are how they conduct most boiler services, additional checks are depending on the boiler type you have. For example, if you have a condensing boiler, they will also check the drainage system of the boiler.
Is it time to book your boiler service?
If you answer yes to any of the following, you should get in touch with any boiler service as soon as possible:
- The flame in the boiler is irregular
- The boiler flame is yellow
- There are new stains or smoke marks on the appliance or nearby
- The boiler overheats or refills regularly
- The water pressure drops
- The pilot light often goes out
- It’s been a year or more since the last service.
223b Hightown Road, Liversedge, West Yorkshire, WF15 8BN,
01924 614075