Today, aquatic floating feed machine technology is very popular in the manufacturing of aquafeeds, as it can be used to create a range of feeds, whether drifting or sinking, relying on the requirements of each varieties. On top of that, the extruded feed made by water floating feed device has less debauchment and also high efficiency, assisting to enhance digestibility.
During the marine drifting feed device extrusion procedure, mechanisms such as temperature, humidity, stress will boost starch gelatinization, disintegrate and also soften the cell wall surface and also release some conveniently digestible compounds, therefore promoting the food digestion and also absorption of farmed pets.
With marine floating feed machine extrusion innovation, it is feasible to inhibit certain protease preventions (such as antitrypsin), damage virus in raw materials or modification protein homes to additional enhance the contact with enzymes in fish as well as shrimp, helping to absorb food extra quickly.
Related post: Floating Fish Feed Mill
Extruded feed made by water floating feed machine can manage the web content of compounds and also assist far better detoxing. At the same time, the longer stabilization time in the water (12-36 hrs) aids farmers to observe as well as regulate the feeding routine.
Although extruded feed made by drifting fish feed making machine has apparent benefits over pelleted feed, the initial financial investment price of extruded feed manufacturing is higher, resulting in greater feed costs.
But also for premium fish farming, more and more individuals are paying attention to the market prospect of high-end fish feed.
Related post: https://www.richipelletmachine.com/floating-fish-feed-mill/
1. Highlight of aquatic floating feed equipment.
Feeding, rotating cutting, and main drive all take on regularity conversion speed law system, which has solid power, stable procedure, energy conserving, high water production efficiency, long lasting devices, low failure price, and also practical operation and upkeep.
The screw of floating feed machine is constructed from alloy product by special process, the life span is 3-4 times longer than that of domestic comparable devices, and also the price of generating feed is reduced; the fractional combined screw is suitable for a variety of resources and also more diverse products.
Automatic lubrication system of the floating feed maker decreases mechanical energy intake and also lengthens life span.
The feeding system adopts spiral forced feeding, as well as the feeding is consistent as well as broad. It can be geared up with an automatic feeding system. The feeder is a screw communicating variable frequency speed control to change the feeding total up to control the blowing outcome ( measurable feeding, and can properly stop the material from arching).
Direct bearing tool modification system, adjust the device properly and also quickly.
The twin-screw of floating feed maker has self-cleaning feature, and using equipment is more reasonable and also practical.
Update the setup of different tools modern technology and devices to make the output of the twin-screw drifting feed machine larger.
Different screws and also length-diameter proportions can fulfill different production processes.
Visual automated temperature level control system to make temperature level control much more user-friendly and criteria more precise.
The overall floating feed machine configuration The procedure of the fish feed pellet extruder is extra intuitive and also the maintenance is easier.
Dry blowing procedure adopts self-heating method without vapor system, which is extra in accordance with the actual requirements of users.
No adhesive is needed to process the floating feed, and also it can maintain stability in water for greater than 12 hours.
Small and also average tools is especially ideal for scientific research study institutions, special breeding farms or tool and little feed manufacturing facilities. There are additionally specifically customized experimental twin-screw floating feed makers available for clinical research study units.
Related post: cattle feed plant price
2. The distinction in between pellet feed and also squeezed out feed.
With the growth of the floating fish feed handling industry, 2 widely made use of technologies presently utilized to produce aquafeed are pelleting and extrusion by drifting feed maker. Contrasted to natural lures, such feeds have greater dietary content and also stability, much less dampness, easier storage, fewer pathogens, and much longer storage space times.
Pelletizing by drifting feed machine is a method of pressing little pellets of raw material into bigger pellets, throughout which moisture, temperature and also pressure can significantly impact the high quality of the feed.
Among the major advantages of pelleted feed is reduced manufacturing expenses. Nevertheless, it has some downsides.
Among the greatest negative aspects of pelleted feed is that it sinks faster and dissolves quickly in water (according to data, regarding 10-15% of feed is thrown away), which indicates greater feed costs, reduced farming revenues, as well as less complicated cause water contamination.
3. Choose pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When picking feed, farmers ought to consider the attributes of different marine varieties and also feeding practices. Since the habit of shrimps and crabs is to find food at the bottom, and afterwards consume the food slowly, so the food should not be as well hard and also not conveniently soluble in water.
For that reason, extruded debris by floating feed maker is the very best selection because it is soft as well as challenging to dissolve in water, and it is convenient for shrimp and crab to eat, lowering feed waste and decreasing water contamination.
Specifically in intensive shrimp farming, squeezed out feed should be leading, because it is less complicated for shrimp to absorb protein from extruded feed, which decreases feed waste and also advertises far better protein absorption.
At the same time, we can also boost the absorption rate of the feed by including beneficial microbes or boosting digestive system products to the feed.
Nevertheless, from a long-lasting viewpoint, using extruded feed, which is made by drifting feed machine will raise the cost, as well as if the fish use squeezed out feed in the fully grown period, it may cause fish fat, big tummy, bad anxiety capability, not suitable for long-distance transport, etc, resulting in a low cost at the time of sale.
Consequently, in the process of tank farming, when numerous farmers use feed, they frequently utilize a combination of pellet feed and extruded feed, which not only regulates water top quality, decreases feed deposits, but likewise enhances efficiency and economic advantages.
At the same time, the aquaculture sector is promoting the additional development of the two feeds because of their respective advantages.
4. Installment of drifting feed machine.
( 1) Installation of floating feed maker pipeline rack.
The selection of the setup position of the pipeline shelf depends upon the site area, yet it must not be also far from the main engine. Much from the primary engine will certainly trigger waste of products throughout pipeline link on the one hand, and also cause the hysteresis of the control system on the other hand.
If the setup location on website permits, the very best setting of the pipe rack is to be directly behind the main engine and also conditioner, parallel to the primary engine, as well as about 1 meter away from the major engine (there is a certain maintenance room), while making sure that the pipeline shelf is changed upwards. The setting of the vapor line interface of the conditioner gets on the side of the conditioner.
In order to promote the cleansing of the ground and the discharge of drainage in the future, the pipeline shelf need to be raised by about 10 cm during installation. In the installment of each valve in the pipeline, the placement of the valve wheel should satisfy the requirements of hassle-free operation for drifting feed maker.
( 2) Installation of drifting feed maker control box.
In order to facilitate the operation, the installment placement of the on-site control box must be picked near the bypass, and also a certain area needs to be booked between the bypass as well as the control box to temporarily place the wastes streaming from the bypass.
The distance between the frequency converter of the reducing electric motor and the rotating positioner of the on-site cutter ought to not be as well far. It is regulated by voltage. If the distance is also much, it will trigger voltage changes and also influence the cutting impact.
The circulating temperature display tool on the on-site control box is to display the temperature of each end of the puffing cavity in real time, and also the presented temperature series has particular needs. Section 2 Expansion dental caries ... till the material discharge growth tooth cavity, this series needs to be focused on when circuitry the electric control.
Furthermore, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed maker. They regulate the opening of each nozzle with the electromagnetic cut-off valve.
The floating feed machine conditioner inlet nozzle switches 1 to 4 on the control box correspond to the conditioners The first nozzle to the fourth nozzle from the feed end.
For details please contact: wood pellet press manufacturers
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com