The ring die and journalism roller of the biomass pellet making device rotate at a continuous rate, as well as the working state of each split second is basically the very same. If the quantity of feed material is unchanged, the power usage need to additionally be fairly secure, as well as the current will certainly be assessed the electric motor. Additionally fairly stable.
When the biomass pellet making equipment equipment is working, we readjust the feeding amount as long as the material thickness in the feeding area is less than the maximum beginning factor of the pressing location, it will directly impact the length of the reliable workspace of the pressing location and journalism area, as well as trigger the existing to stream.
RELATED POST: biomass pellet machine
The fluctuation and the modification of the hourly result of the biomass pellet making maker, as well as if the density of the product layer in the feeding location is above the maximum beginning point of the pressing area, in addition to raising the thickness of the product layer in the feeding area, it will not affect the hourly output and energy consumption per unit time.
If there is any kind of influence, it will certainly no longer create changes in present as well as biomass pellet making machine result. Since the thickness of the material layer in the feeding area surpasses the maximum starting factor of journalism area, the interval between the pressing zone as well as the pressing zone is constant without any change. In the interval where the multi-feed product lies, the securing angle is above the essential rubbing angle, and the material will certainly not be squeezed into the pressing area.
In this way, with the boost of the feeding amount of the biomass pellet making device, the balance of in and out is broken, and the in is greater than the out, and also the product layer in the feeding location is It will certainly build up thicker as well as thicker until all the gaps are filled as well as blocked to the feed port, to make sure that the biomass pellet equipment can not function typically. Currently, the current will enhance.
RELATED POST: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-mill.html
In the real job of the biomass pellet making machine, with the modification of the feeding quantity, the rapid outcome and the current of the major motor will certainly change as necessary. And when the feeding density does not go beyond the optimum beginning point of the pressing area, it will not trigger increasingly more worldly layers in the feeding location as a result of the rise in the amount of powder we feed.
As has actually been said before, the location that can create immediate output and also energy consumption modifications ought to be the two areas of work and product layers - the compression area as well as the biomass pellet device extrusion area, so we believe that the 3rd location stated over- - The affordable existence of the feeding location has specific conditions.
That is to state, the fed product layer is dispersed in the compaction area, the extrusion area as well as the feeding location whose complete density does not surpass the optimum access factor of the compaction area.
RELATED POST: complete wood pellet plant
The biomass pellet making equipment will certainly function normally under the allowed power. If the amount is as well large and goes beyond the thickness of the optimum beginning point of the compaction area, the material layer will certainly gather and gradually increase, and the biomass pellet making maker will not function normally. Present is rising and fall.
Through the above evaluation, let's talk about some sensations displayed by the biomass pellet making machine under two feasible working conditions:
( 1 )When the power of the major electric motor is not large sufficient compared with the matching biomass pellet making device granulation specifications, the density of our feed goes to the end of the extrusion area as well as the optimum entrance factor of the compression zone (this will certainly differ with the raw products, compression ratio, efficient length-diameter ratio, moisture, pressure rollers and other variable factors to change as necessary), usually will not go beyond the optimum starting factor, with the increase of the feeding amount, the compression area will alter appropriately.
The size of the period will be reduced, as well as the interval length of the squeeze area will slowly increase as necessary, and also the current of the main motor will certainly additionally slowly boost until it reaches the maximum allowable use. If the existing reaches the protection value we set, and the thickness of the feeding product has not surpassed the thickness of the optimum beginning factor of the biomass pellet equipment pushing area, if the feeding quantity is increased, the security system will certainly act, as well as the excess powder will be released. In order to make certain the normal feature of biomass pellets.
( 2 ) Intend the power of the major motor is large or the electric motor fails to overload after the density of the feeding material exceeds the density of the optimum beginning factor of the pressing location as a result of the comprehensive adjustments of many variables. At this time, the powder fed to the people can not raise the moment result, neither will certainly it cause the boost of the major electric motor existing, yet can only remain to boost the powder stack built up in the equipment up until the internal cavity of the biomass pellet press device is blocked.
Create the biomass pellet making machine to not function correctly. Naturally, this special sensation rarely occurs in actual production (if the raw product wetness is also large, the efficient aspect proportion is as well tiny, the pressure roller is drastically put on and also the space is not adjusted properly, the raw material is replaced, and so on, this phenomenon may take place), this is our undesirable problems.
In-depth analysis of the very first generally utilized working state, it is simple to know that on the property that the relevant problems are unchanged, with the change of the feeding amount, the interval size of the compression zone as well as the extrusion zone is within a certain array Corresponding modifications are additionally made (the feed circulation price is reduced, the size of the extrusion area is reduced, as well as the size of the compression zone is lengthened; otherwise, the extrusion area is prolonged and also the compression area is reduced), and also the feeding amount does not surpass the pressure. When the thickness of the maximum starting point of the limited area is concerned, the lengths of the above two intervals are not a constant value when this article is written. The larger the extrusion zone length value, the higher the biomass pellet maker production efficiency and the longer the pellet length per extrusion per roller.
Therefore, it is concluded that the factors of current instability under the condition of controlling the feeding amount need to be investigated from the moisture content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, and the raw materials are replaced.
RICHI MACHINERY has been established for more than 25 years, specializing in biomass pellet making machine for sale, the development and production of single/complete pellet production lines such as animal feed, biomass fuel, wood waste, grass, straw, organic fertilizer, etc, and provide design and services for EPC/Turnkey projects!
For details please contact: pellet equipment
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com