The cost of the biomass pellet production line is figured out by the resources utilized. For example, if the raw materials are branches as well as trunks with high wetness content, they must be chipped - smashed - dried - granulated - stuffed - delivered. It generally depends upon what basic materials are used. 350 type biomass pellet maker devices 38,000, design: 350 type 300 ~ 500 kg per hour, 450 type 500 ~ 800 kg, 560 kind 1 ~ 1.5 tons, 600 type 2 loads, 850 type 3 ~ 4 tons.
The good marketing in Indonesia totally biomass pellet assembly line rate relies on your raw materials and result dimension. First of all, you require to recognize what your basic materials are. The raw materials are prefabricated sawdust or timber chips as well as the moisture material of the materials is 10%-15%. A manufacturing facility offered new innovation wood pellet equipment is enough. If your resources are unprocessed logs, branches, etc need to be shattered by a timber chipper and also biomass crusher, after that dried in a dryer (if the wetness goes beyond 15%, it needs to be dried out), after that the main maker is granulated, and afterwards the packaging device loads this set of assembly line.
Related post: biomass pellet production line
Understanding your resources has to do with the output. The output of the biomass pellet mill machine is different and also the version is various, so the cost is additionally different. The biomass pellet assembly line rate is not just a matter of reporting a number, however it is essential to develop a strategy as well as quotation according to your demands.
First of all, the raw product dampness needs of wood pellets are really stringent. The moisture content of the material is too high, which obstructs the die holes, to make sure that the bits can not be created; if the dampness content of the material is too low, if it is also dry, it is not easy to form, and also the viscosity is not nearly enough.
Usually 12%-13%, 15-20% of the raw product moisture after inflection is the criterion for pushing timber pellets. If the raw material moisture is too expensive, the mold and mildew resistance and also sliding sensation will certainly happen after the raw material goes into the biomass pelletizer ring die; take note of control the moisture web content of the raw product prior to entering the biomass pelleting maker, If the water material is too high, there will be slippage in the ring die, causing the phenomenon that it is not easy to release.
Related post: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-production-line.html
If your basic material moisture fulfills the needs, a biomass timber pellet press maker can produce timber pellets. If it does not meet the needs, it requires to be dried out, so it requires to be furnished with a timber clothes dryer and a hot blast stove. Certainly this is if your raw material is timber chips. If your raw material is wood chips ( density less than 0.5 mm), it needs to be pulverized, which amounts adding another procedure. Some clients' basic materials are bark, which is likewise feasible after including a timber pulverizer.
Nevertheless, some clients' basic materials are wood scraps, because the price of wood scraps is cheap and easy to get, so there are several situations, then it is essential to add a timber chipper, initially to reduce the non-standard timber scraps right into wood chips, and then most likely to crush.
For some clients whose raw materials are waste structure templates, it is necessary to change the timber chipper to a bamboo plywood crusher.
Related post: biomass pellet plant for sale Indonesia
Since the bamboo plywood itself has numerous iron nails, it is very easy to damage the knife on the timber chipper when making use of a timber chipper. An additional reason is that the waste building template is reasonably large, and also the feed port of the timber chipper is normally 1250px.
It is impossible to manually break it in advance, right? The bamboo plywood crusher can go into any bamboo plywood with a feed opening of less than 1.25 m, and also the gnawing blade of the bamboo plywood crusher is an ingot blade, and the iron nails have little impact on him. right here
Unlike timber chippers, the blades are conveniently damaged. Bamboo plywood is likewise an benefit of making wood pellets. Typically, its dampness content is really tiny, between 15-20%. Therefore, using bamboo plywood as pellets conserves the problem of wood drying out makers.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com