( 1) Just how to make the mold life much longer?
With the continual introduction of wood pelletizer maker right into the market, the advancement of mechanical devices is likewise regularly changing. The wear and tear of the mold and mildew throughout the manufacturing of timber pellets is also a major price. So, just how to maintain it directly affects the service life of the timber pellet making device. Therefore, it likewise straight influences the handling expense of wood pellets. How to make the mold and mildew life of the wood pelletizer machine machine longer? Obtain your solution today!
① Regularly clean oil as well as fill
If the timber pelletizer machine is not made use of for a month, it is advised to clean the oil inside, so the oil will slowly solidify throughout long-lasting storage, which will certainly make it hard to eliminate the following time it is used, which will seriously influence the succeeding use of the mold of timber pelletizer machine.
Related post: wood pellet maker prices
After the pellets are processed, it is necessary to utilize oil to grind for a time period to ensure that all the oil remains in the die opening, which is of excellent advantage to the job the next day and also is also conducive to the lasting use of the die. The oil can be mixed with waste engine oil and wood chips. It can be made once as well as can be reused.
② No demand to cleanse the mold for a long period of time
If the mold and mildew as well as squeeze rollers are no more made use of for a long time, it is recommended to eliminate the mold after cleaning and also storage space. The master cleans up the sawdust pellets inside the mould and also complies with the mould surface. In this way, on the one hand, we can protect against the enterprise from being difficult to remove the pellets due to the solidifying of the pellets as a result of the lasting storage of the students. On the other hand, because the sawdust has water absorption, if the sawdust externally is not gotten rid of, it may speed up the growth of the rust of the mold surface area.
③ The mold and mildew should be saved in a dry and also aerated location
Most of the mold and mildews of the timber pelletizer machine are made of alloy steel. If they are in a damp area for a long time, the surface of the mold and mildew might be harmed due to air deterioration, thus greatly reducing its life span.
Related post: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html
④ The managing process must beware
The mold and mildew of the wood pelletizer equipment is a high-precision part, as well as the mold and mildew hole is very carefully refined according to the compression ratio of the mold. If you are careless during the managing procedure, the framework of the internal wall of the mold and mildew opening is damaged, which may lead to molding throughout processing. low rate and short service life.
The above are the ideas on just how to make the mold life much longer for wood pelletizer maker Adhere to these 5 methods to keep the mold and mildew, and also I believe your mold and mildew will last much longer.
( 2) Why do the pellets generated by the wood pellets machine have a bad look?
Why do the pellets produced by the wood pellet mill device look bad? Today we will certainly find out why. Throughout the production of wood pellet fuel by the wood pellet manufacturing device, there will be a scenario where the pellets include powder as well as have a rough surface area. At this time, it is likewise essential to inspect the equipment information settings of the timber pelletizer equipment. Besides, what is the reason for this phenomenon?
Wood pellets cause more wood pellet powders, this feedstock can be caused by reduced wetness material, the moisture web content of timber pellet equipment feed is normally between 12% as well as ~ 15%. After adjusting the moisture content of the raw material, the issue still exists, that is, the stress roller die is seriously worn. When the inner surface area of the ring die of the wood pelletizer device is severely put on or the particle diameter needs to be altered, it needs to be changed. The surface area of the sawdust pellets is rough, which might be caused by the excessive dampness web content of the raw product, or the initial use the mold and mildew. This trouble can be addressed by readjusting the moisture web content of the raw material, or by repeatedly grinding the mold with the material.
Related post: turnkey wood pellet mill
To sum up, the reasons the pellets generated by the timber pelletizing maker are bad in look are mentioned today. I hope it will assist you when you utilize the timber pellet equipment once again. Throughout the years, Richi Equipment has concentrated on the research and development as well as production of wood pelletizer maker machines, biomass pellet devices, sawdust pellet devices, gas pellet makers, timber processing tools, drying tools, cooling down devices as well as packaging devices.
( 3) Recommended wood pellet device.
There are several timber pellet mill maker on the market. Today, Richi Machinery will suggest several of them:
① The very first type of little wood pelletizer equipment
It is a brand-new type of biomass power machinery individually developed by our business's technological staff and also has independent copyright rights. The wood pelletizer maker is basic in framework, very easy to operate, stable in operation, and can work continuously. The pressed pellets have the advantages of high density, high combustion worth, reduced moisture and also low ash web content. The wood pellet machine maker gearbox adopts high-precision equipment transmission, four sets of gears are linked, and the hydraulic oil shipment system can automatically distribute oil between the gearbox as well as the main shaft bearing. The service life of the major shaft and also gearbox equipments.
The working parts of the timber pelletizer equipment die plate, stress roller) are made from alloy steel, and the solidity after warm treatment can get to more than 50, which makes certain the constant procedure of the device and extends the life span of the whole wood pelletizer equipment The electronic control system of the major engine adopts the global typical setup of star-delta beginning, as well as the procedure is extremely secure.
② The 2nd sort of tiny timber pelletizer equipment.
Mostly suitable for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and also various other crop stalks and also factory wastes. It is suitable for reduced temperature level granulation of organic microbial fertilizer, natural plant food as well as substance fertilizer.
Attributes of this timber pelletizer maker:
① The stress rollers are evenly dispersed, as well as the operation is steady. At the same time, the pressing area is increased, and the production efficiency is boosted.
② The screw facility pressure regulating structure is embraced, and also the timber pelletizer device mold space can be large or tiny, which is suitable for different products to ensure the important effect.
③ This design is outfitted with Φ6-Φ10mm size mold and mildews, which appropriate for granulation of different materials and also achieve the best benefit.
For details please contact: pelleting machine
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com