Gutter Apron Vs Drip Edge
Gutter aprons are L-shaped metal pieces that slide beneath your shingles and hang an inch below the back of the gutter. Unlike standard drip edges, which are attached to your roof's trim, gutter aprons are inserted further beneath your shingles, providing an additional layer of protection just beneath the surface of your roof. Lets Get information about Gutter apron vs drip edge.
What Is a Drip Edge?
Drip edges are installed on the trim of the roof. Its curved design directs water away from the roof and prevents moisture from getting underneath your shingles and into the fascia board, which could lead to mould and rot. To prevent water from falling into the gaps, the drip edge's face must overlap the gutter.
Also Read: Pitched Roof Types
What is a Gutter Apron?
Gutter aprons are L-shaped metal pieces that slide beneath your shingles and hang an inch below the back of the gutter. Unlike standard drip edges, which are attached to your roof's trim, gutter aprons are inserted further beneath your shingles, providing an additional layer of protection just beneath the surface of your roof.
They also have larger dimensions than drip edge flashing, which gives them more reach when it comes to keeping water out.
Also Read: Roof Flashing Types
Cost Factor
Roof flashing installation is very inexpensive, with little to no price difference between gutter aprons and drip edges. If you use aluminium or galvanised steel, the cost per linear foot of flashing will be around $1 to $3. Copper is the more expensive option, costing between $35 and $75 per 10 linear feet.
If you decide to hire a professional to install your flashing, you will also have to consider labour costs. It is a day-long project with hourly rates ranging from $45 to $75. To get an exact quote for your roof, contact your local roofing company.