Techniques For Glock 43 Trigger Loading

Safety instructions for dealing with weapons are written in the blood of those who have failed to comply. There are rules for modern weapons glock 43 trigger, there are for muzzle loading, they are very similar in many ways. When working with weapons that carry the mouth, there are more opportunities to harm you find more info and your weapon, so a clear sequence when loading ensures your safety.

Preparing for loading

• Before starting to load the weapon, pay attention to hold the flint on the lips of the trigger, place the glock 43 trigger halfway and open the shelf cover.

• In the trunk on the side there is a fire tube through which the powder load is ignited - it must be clean. If the hole is clogged with dirt or dust combustion products, clean it with a pin.

• The lock cover must be dry and clean, in no case should you lubricate it and not grab it with greasy hands. Insert the pin into the fire tube and lower the chair, take the dipstick and check the barrel for a load.

• In advance, it is best at home, in a calm environment, to prepare patches and candies in sufficient quantities, measure the powder and pack it for easy use.

• Cut a sufficiently dense fabric into squares measuring approximately 5x5 cm, you will need them to dry the drum during the filming process.

• Take care to protect your vision and hearing.

We do everything in strict sequence:

1. Place the glock 43 trigger in half and turn the shelf over, insert a pin into the fire tube and lower the shelf.

2. Pour the gunpowder into the barrel (you just have to measure it in your hands, the rest of the supply is removed).

3. Place the patch on the pipe and press it down with a bullet.

4. Slide the bullet into the barrel with a match, first with a short shoulder and then a long one.

5. Take the dipstick.

6. Send the bullet to the loading chamber. A wooden stick on your weapon for added authenticity. If used incorrectly, it can break and injure you. Stock in advance with a metal rod.

7. Make sure the load is securely attached to the pipe, put the dipstick to the side.

8. Turn the lock cover and pour the powder onto the shelf (as a rule, the smaller powder, which is used in a separate bag, is usually dumped on the shelf).

9.Remove the captive screw from the fire tube and lower the cover.

10. Everything, the gun is loaded. To fire a shot, place the trigger on the battle stick, aim and pull the trigger.

Recommendation: after each shot, dry clean the barrel with a stick with a patch, lock the shelves with a brush, fire tube, respectively, with a pin.

Upon returning home, a thorough cleaning should be carried out by separating the barrel end and the lock.

The first rule: don't panic - it could be a misfire or a long shot. Both this and the other are not terrible and happen from time to time. We continue to hold the gun in a safe direction for 1-2 minutes. If there is no shot, place the trigger in half, turn the cap, clean the tube of the mark with a pin, update the load on the shelf, inspect the pedernal and the chair (both must be clean and dry). We lower the lid, pull the glock 43 trigger and fire.

Theoretical knowledge will not replace experience, so in order to be able to photograph accurately, constant and daily exercise is important. If the goal is to become a well-aimed sniper, and the gun is only needed to scare away packs of stray dogs and unwanted forest visitors in a country house, it will be enough to use the gun and know how to load the gun with salt.

Many consider the hunting rifle to be something like a scarecrow, but they are not in a hurry to draw conclusions - there are hunting rifles with different potential and quality. To use a weapon as a scarecrow, you must not buy an expensive model of a weapon - a fairly simple model. Instead, it will be, before choosing a weapon to see its characteristics. In addition to the gun, gun grease is required. Furthermore, it would be wrong to buy a weapon without the initial skills to use it.

To start with, before you buy a gun and learn to load it with a shot or salt, you need at least be able to hold it in your hands and shoot. The butt of the gun rises and places emphasis on the shoulder. The neck of the bed is compressed with the right hand, and the forearm is compressed with the left hand, and slightly more than the glock 43 trigger guard. At the moment when the shot must be fired, with the thumb of the hand that is going to shoot, it is necessary to grab the neck of the chock so as not to injure it during the shooting process. This is the standard on how to hold a gun in your hands.

Having learned how to fire a weapon, you can begin to learn how to charge it. To load the shotgun, the barrel of the shotgun must be directed upwards while carefully holding your left hand during loading. Salt instead of cartridges can be used if you want to scare off a bunch of dogs or unwanted guests from a country house, which can be considered a means of self-defense.

How to load a gun with salt: It is necessary to take a cartridge from the regular factory and disassemble it. Pour the charge into the cartridge and prepare the salt. The usual small and even large salt, which is available in stores, will not work - you will need salt for food, which is crushed with 5 mm pieces. (It is very important to grind the salt correctly, because very small pieces are not able to pierce clothes, and very large pieces of salt can cause serious injuries.)

It is important to remember that a point-blank shot, even with fine salt, can cause injuries. It is recommended to shoot a gun with salt from a distance of not less than thirty meters. Typically, when preparing documents for a gun, before purchasing a gun, the buyer is advised of security measures. In addition, there are laws on the permitted degree of self-defense. In this case, a gun loaded with salt can be considered an acceptable means of self-defense, and it will be possible to clarify with the authorities.